HSU-ManualOpMan-82E

HARD SPOT INSPECTION TROLLEY - English - Page 82/84

Operating and Maintenance Instructions

adaptaed from: https://app.box.com/s/c6qfgtuhfg1yd2ottrfum98x8jmg7rn3

Hard spot inspection trolley • PLAMAT-M • 18201

Operating and Maintenance Instructions • V2.0

Appendix

9.2 Maintenance checklist

Regular maintenance and cleaning of the individual system components increases the lifetime of the inspection device and reduces repair costs.

NOTICE

! Injury risk or damage of property!
Always note the section „Safety Instructions“ (1.3)!

Proceed according to the checklist:

Table 15: Maintenance and cleaning intervals

Cycle Weekly	Cycle Monthly	Part	Cleaning/Maintenance Work
X		Inspection device	Clean system and operation range (oil and material residues, dirt), in particular: • Sensor and their ceramics • Encoder system Remedy deficiencies and damages.
	X	Wheels	Check for excessive abrasion and damages.
	X	Guide rollers	Check rollers for ease of movement. Check for abrasion or damages.
	X	Cable drags	Check for damages. Check cables for relief. Cables are to be flexible and must not be twisted.
	X	Inspection device	Check all screw connections.
	X	Runner blocks	Lubricate with grease guns via grease nipples with one of the following recommended lubricants: • Rexroth R3416 037 00 • Castrol Longtime PD2 • Elkaub GLS 135/N2
	X	Guiding rails	Clean rails, but do not degrease. Check for wear and damages.

9.3 Technical drawings and parts lists

The last pages of this manual consist of technical assembly drawings and the corresponding bills of material.

ROSEN and IZfP Page 82 of 84

Confidential!